WDS TP-Link: what is it and how does it work?
WDS (Wireless Distribution System) is a technology for wirelessly distributing a signal between multiple access points. This allows you to expand the coverage area of your Wi-Fi network and improve the signal quality in hard-to-reach places. WDS is implemented on many TP-Link routers and allows you to create a wireless bridge connection between two routers. One of them operates as the main router, and the other in repeater mode. To set up WDS on a TP-Link router, you must first enable this function on both devices. Then you need to set up a wireless bridge connection between them. To do this, you need to enable WDS mode on the main router and specify the MAC address of the repeater. On the repeater, you must also enable WDS mode and specify the MAC address of the main router. After setting up WDS, the access points are automatically configured to work in the same wireless network. Thus, you can expand the coverage area of your Wi-Fi network without the need for a wired connection between the routers. Using WDS allows you to save time and money on laying a cable line between access points. In addition, it is convenient for creating a Wi-Fi network over a large area, where it is necessary to provide coverage in hard-to-reach places. WDS (Wireless Distribution System) is a technology that allows you to expand the coverage of a wireless network without the need for additional cables. It is especially useful for those who have a large home or office, where the Wi-Fi signal may not reach remote areas.
TP-Link is one of the router manufacturers that support WDS technology. Using WDS on a TP-Link router has a number of advantages, including:
1. Extending the Wi-Fi range to the far corners of your home or office.
2. Reduce shadow areas where Wi-Fi signal may be weak or absent.
3. Improved Wi-Fi speed and performance.
4. Savings on cable connections.
Enabling WDS on a TP-Link router is not difficult. First, make sure your router supports WDS. Then, go into the settings of your router, find the “Wireless” or “Wireless Network” section, and select “WDS”. Then specify the SSID and MAC address of the second router that will be used to expand the network.
It's important to remember that using WDS may slow down Wi-Fi speeds, especially if you have multiple devices. However, properly configuring WDS can give you significant improvements in wireless coverage.
How to configure WDS on a TP-Link router via browser
If you want to expand the Wi-Fi coverage in your home, you can use WDS technology on your TP-Link router. WDS (Wireless Distribution System) allows you to connect several wireless access points into one network, which allows you to increase coverage area and improve signal quality.
To configure WDS on a TP-Link router, follow these steps:
1. Connect your computer to your TP-Link router using an Ethernet cable and open your browser.
2. Enter address 192.
168.
1.
1 into your browser's address bar and press Enter. Enter your username and password to access the router settings.
3. Find the Wireless section and select WDS from the menu on the left.
4. Click the Search button to search for wireless access points in your area.
5. Select the wireless access point you want to pair your TP-Link router with and click the Connect button.
6. Enter the password for the wireless access point and click the Save button.
7. Repeat steps 4-6 for each wireless access point you want to pair with your TP-Link router.
8. Click the Save button to save the WDS settings.
You can now enjoy improved Wi-Fi coverage in your home by setting up WDS on your TP-Link router.
Problems with WDS on a TP-Link router and their solution
Users of TP-Link routers often encounter problems when enabling WDS. Some of these problems may be due to incorrect settings or incompatibility with other devices. However, most problems can be resolved on your own by following simple instructions.
Problem #1: Can't connect to WDS
If you're having trouble connecting to WDS, first make sure you've used the correct settings. Make sure you have entered the correct password and selected the correct network.
Problem #2: Low data transfer speed
If your WDS transfer speed is slow, check to see if your router is in the coverage area of other wireless networks. If so, try changing your network channel to a less busy one.
Problem #3: WDS does not work at all
If WDS is not working at all, then first make sure that the devices you are trying to connect are WDS compatible. If they are compatible, then try rebooting the router and the devices you are trying to connect.
In conclusion, if you are still unable to resolve the WDS issue on your TP-Link router, try seeking help from a professional who can help you understand the root cause of the issue and resolve it.
How to check the operation of WDS on a TP-Link router
If you have enabled WDS on your TP-Link router, then you need to check if it is working correctly. There are several ways to do this.
1. Checking the presence of a WDS network. To do this, go to the router settings and find the 'Wireless' tab. If WDS is working, then there should be a network named 'WDS'. If it is not there, then you need to re-configure WDS.
2. Checking the connection between routers. To do this, connect to the WDS network and open a command prompt on your computer. Type the command 'ping (other router's IP address)' and press Enter. If the connection works, you will receive replies from the other router.
3. Check the connection speed. To do this, you can use special programs, for example, SpeedTest. They allow you to measure the data transfer speed between routers. If the speed is lower than expected, then you need to check your WDS settings and Internet connection speed.
Checking the functionality of WDS on a TP-Link router will not take much time, but will ensure that the settings are correct and the network is productive. WDS (Wireless Distribution System) is a technology that allows you to combine several wireless access points into a single network and expand your Wi-Fi coverage area. TP-Link routers also support this feature. In this article, we will look at best practices and tips for using WDS on a TP-Link router.
Before setting up WDS, you need to make sure that all access points are on the same local network and have the same security settings. To configure WDS on a TP-Link router, follow these steps:
1. Log in to the router’s web interface using your username and password.
2. Configure your main router by selecting WDS mode in the “Wireless” section.
3. Enter the SSID and password for your primary Wi-Fi network.
4. Specify the MAC addresses of the wireless access points that you want to join in the WDS network.
5. Configure additional settings such as channel and data transfer mode.
6. Save the settings and restart the router.
After setting up WDS on each access point, make sure that all devices are connected to the same network. You should also check the signal strength and data transfer speed on each access point.
In conclusion, using WDS on a TP-Link router can significantly increase Wi-Fi coverage and improve signal quality. Although setting up WDS can be complicated, by following our tips and best practices, you should be able to successfully set up this feature on your device.
Read further:
English 
Russian